AQUAPANEL® Cement Board Indoor is a solid, durable tile backing board for interior use. It is made of aggregated Portland cement with coated glass fibre mesh embedded in back and front surfaces. The ends are cut square and edges are reinforced for extra strength (the EasyEdge®). The panel is 100% water-resistant and resistant to mould and mildew. It is non-combustible and has low installation costs

AQUAPANEL® Cement Board Indoor is used for construction of indoor walls. Here, it serves as a substrate for tiles or other finishing options. AQUAPANEL® Cement Board Indoor (Lighter. Easier. Faster.) complies with EN 12467 Class 2.
AQUAPANEL Interior is used while arranging:
• areas around swimming pools in the private and public facilities,
• decoration of kitchens and areas where wet cleaning is carried out daily,
• showers,
• car washes,
• Laundry,
• garages and basements.

Installation process includes the following stages: 
• Cutting AQUAPANEL Interior boards.
• The installation of a metal or wooden frame.
• Mounting plates with polyurethane AQUAPANEL Clay grout.
• Handling of the entire surface finishing putty by mixture AQUAPANEL-White.
• decorative trim.

Always carry boards upright using a board trolley or on a pallet using a forklift truck. When setting the boards down, make sure that corners and edges are not damaged. The supporting surface must be able to carry the weight of the boards. A pallet of AQUAPANEL® Cement Board Indoor applies a load on the floor of about 700 kg to 2250 kg (as delivered). AQUAPANEL® Cement Board Indoor must be protected from the effects of moisture and weather before installation. Boards that have become damp must be laid flat and dried on both sides before use. Allow time for the boards to acclimatise to the ambient temperature and moisture conditions before installation. The material, ambient air and background temperature must not be below +5 °C

Tile backing board for wet and humid areas 
100% water-resistant 
Ecological and environmentally friendly 
Resistant to mould and mildew 
Strong, robust, impact-resistant 
Can be cut to shape using "score and snap” techniques 
Simple and easy to install 
Can be bent when dry - up to 1 metre bending radius

Technical specifications
Width (mm)900 / 1200
Length (mm)1200 / 2400 / 900 / 2000 /
2400 /2500 / 2800 / 3000
Thickness (mm)12,5
Min. bending radius (m) of the plate width of 900 mm3
Min. bending radius (m) for the bands of 300 mm width of plates1
Weight of 1 m2 plate (kg / m2)around 15
Density (kg / m3)around 1050
The flexural strength (MPa)≥ 6,9
acidity index (pH)12
Modulus (MPa)Not less than 2500
Thermal conductivity (W / (m * K)0,27
Resistance to water vapor diffusion (μ)50
Changing the length of the dry to water saturation (%)0,2
Grou of flammabilityNF